mriscoc/Ender3V2S1

Professional Firmware for the Creality Ender 3 V2/S1 Printers

Github : https://github.com/mriscoc/Ender3V2S1

Wiki : https://github.com/mriscoc/Ender3V2S1/wiki

If using the Sprite pro see : https://github.com/mriscoc/Special_Configurations you want the T13 variant.

Releases for the T13 variant are here : https://github.com/mriscoc/Special_Configurations/releases/tag/T13

Useful calibration guide : https://github.com/mriscoc/Ender3V2S1/wiki/Calibration-Guides

Note that if using BL/CRTouch you need to properly configure your slicer (mandatory) and Octoprint (if used).

If you want to do a full UBL or "tilt" before each print see https://github.com/mriscoc/Ender3V2S1/wiki/Slicer-G-code-Scripts